Touchpad Cable - HP Chromebook 14-db0 Series Maintenance And Service Manual

TouchPad cable

Description
TouchPad cable
Before removing the TouchPad cable, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
3. Remove the bottom cover (see
4. Remove the battery (see
Remove the TouchPad cable:
1. Release the ZIF connector (1) to which TouchPad cable is connected, and then disconnect
the TouchPad cable from the system board.
2. Release the ZIF connector (2) to which TouchPad cable is connected, and then disconnect
the TouchPad cable from the TouchPad.
3. Remove the TouchPad cable (3).
4. Remove the TouchPad cable.
Reverse this procedure to install the TouchPad cable.
Bottom cover on page
Battery on page 24).
22).
Component replacement procedures
Spare part number
L14330-001
27