Touchpad - HP Chromebook 14-db0 Series Maintenance And Service Manual

TouchPad

NOTE: The TouchPad spare part kit does not include the TouchPad bracket or TouchPad cable. The TouchPad
bracket is available using spare part number 926879-001. The TouchPad cable is available using spare part
number L01851-001.
Description
TouchPad
In chalk board gray finish
In ink blue finish
In snow white finish
Before removing the TouchPad, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
Remove the TouchPad:
1. Release the ZIF connector (1) to which TouchPad cable is connected, and then disconnect
the TouchPad cable from the system board.
2. Release the shielding (2) and tape (3) that cover the TouchPad.
28 Chapter 5 Removal and replacement procedures
Bottom cover on page
Battery on page 24).
22).
Spare part number
L46559-001
L46734-001
L46735-001