Closing The Display Panel; Customizing Your Computer's Settings - Toshiba TECRA GMAD00134010 User Manual

78
Getting Started

Customizing your computer's settings

4 Select Standby for the options you want.
NOTE
5 Click Apply.
6 Click OK.
Once the computer is configured, you can place it into Standby
mode by either pressing the power button or closing the display
panel, depending on the Standby options set.
Starting again from Standby mode
To start up the computer from Standby mode, press the power
button until the on/off light glows blue. The computer returns to the
screen(s) you were using.
If you place the computer in Standby mode by closing the display
panel, you can start it again by opening the display panel.

Closing the display panel

After you have turned off the computer, close the display panel to
keep dust and dirt out of the computer.
Customizing your computer's settings
There are several ways in which you can customize your computer
to suit your particular requirements. Refer to your operating system
documentation or Help and Support for details.
You may also wish to customize your power usage settings. For
more information, see
additional custom settings you can choose. See
page 135.
These options are set separately for how they operate while the
computer is running on battery power or while connected to the AC
power.
When I press the power button
Set this option to Standby if you want the computer to go
into Standby mode when you press the power button.
When I close the lid
Set this option to Standby if you want the computer to go
into Standby mode when you close the display panel.
"Power Profiles" on page 108. There are
"Utilities" on