Table of Contents
Advertisement
70
Getting Started
Connecting a printer
If your printer does not support Plug and Play, you can set up the
printer as described in
To connect a printer to your computer:
1
Connect the printer cable to the printer and then connect the
other end to one of the computer's USB ports.
2
Plug the printer's power cable into a live AC outlet.
Setting up a printer
NOTE
If your printer does not support Plug and Play, follow these steps to
set it up for the first time. You only need to set up the printer once.
1
Click Start, and then Printers and Faxes.
The Printers and Faxes window appears.
2
Click Add a printer.
The Add Printer Wizard appears.
(Sample Image) Add Printer Wizard
3
Follow the on-screen instructions to set up your printer.
TECHNICAL NOTE: To determine if your printer supports Plug and
Play, check its documentation.
"Setting up a printer" on page
Some printers require a specific installation process. Refer to your
printer installation guide for instructions before completing the
following procedure.
70.
Advertisement
Table of Contents
