Usb Fdd Kit - Toshiba Satellite Pro S200 User Manual

2. Connect the monitor cable to the external monitor port.
3. Turn the external monitor's power on.
4. Turn the computer's power on.
When you turn on the power, the computer will automatically recognize the
monitor and determine whether it is a color or monochrome device. In the
event that you find that there are issues getting an image displayed on the
correct monitor, you should consider using the FN + F5 hot key to change
the display settings (if you then disconnect the external monitor before you
turn the computer's power off, be sure to press FN + F5 hot key again to
switch to the internal display).
Please refer to Chapter 5,
keys to change the display setting.
Do not disconnect the external monitor when in Sleep or Hibernation
Mode. Turn off the computer before disconnecting the external monitor.

USB FDD Kit

The USB floppy diskette drive accommodates either a 1.44MB or 720KB
floppy diskette and connects to one of the computer's USB ports.
USB connector
User's Manual
Figure 3-10 Connecting the monitor cable to the external monitor port
Disk-In-Use
Indicator
Floppy
diskette slot
Eject button
Figure 3-11 The USB floppy diskette drive
The Keyboard, for further details on using hot
Hardware, Utilities and Options
External monitor port
Monitor cable
3-24