Recovery Discs - Toshiba Satellite Pro S200 User Manual

Recovery Discs

Problem
The following
message appears
when executing
Recovery Disc
Creator.
"The Recovery
Disc Creator can
not be launched
because there is
no recovery
partition."
Disposing of the computer and the computer's batteries
■ Discard this computer in accordance with applicable laws and
regulations. For further information, contact your local government.
■
This computer contains rechargeable batteries. After repeated use, the
batteries will finally lose their ability to hold a charge and you will need
to replace them. Under certain applicable laws and regulation, it may be
illegal to dispose of old batteries by placing them in the trash.
■
Please be kind to our shared environment. Check with your local
government authority for details regarding where to recycle old batteries
or how to dispose of them properly. This product contains mercury.
Disposal of this material may be regulated due to environmental
considerations. For disposal, reuse or recycling information, please
contact your local government.
User's Manual
Check to ensure the Bluetooth Manager
application is running on the computer and that
power to the external Bluetooth device is turned
on.
Check to ensure that no optional Bluetooth
Adaptor is installed in the computer - the built-in
Bluetooth hardware cannot operate
simultaneously with another Bluetooth controller.
If you are still unable to resolve the problem,
contact your reseller, dealer or service provider.
Procedure
You will see this message if you have previously
chosen to remove the partition and are trying to
create "Recovery Media". When there is no
recovery partition, the Recovery Disc Creator
cannot make Recovery Media. However, if you
have already created a "Recovery Media", you
can use it to restore the recovery partition.
Simply follow the instructions in
pre-installed software from your created
Recovery Discs section in this manual. You will
be directed to select "Restore Original Factory
Image" from the drop-down menu. If you have
not created "Recovery Media", please contact
TOSHIBA support for assistance.
Troubleshooting
Restoring the
8-23