Wireless Lan - Toshiba Satellite Pro S200 User Manual

Problem
Character display
becomes garbled
during a
communication
session
You cannot receive an
incoming call
LAN
Problem
Cannot access LAN
Wake-up on LAN does
not work

Wireless LAN

If the following procedures do not restore LAN access, consult your LAN
administrator. For more information on wireless communication, refer to
Chapter 4,
Problem
Cannot access
Wireless LAN
Bluetooth
For further information on Bluetooth wireless communication, please refer
to Chapter 4,
Problem
Cannot access
Bluetooth device
User's Manual
Procedure
In data transmission, make sure the parity bit and
stop bit settings correspond with those of the
remote computer.
Check the flow control and communication
protocol.
Check the rings before auto answer setting in
your communications application.
You can also use the ATS0 command. Refer to
Appendix D, S-registers.
If problems persist, contact your dealer.
Procedure
Check for a firm cable connection between the
LAN jack and the LAN hub.
Make sure the AC adaptor is connected. The
Wake-up on LAN function consumes power even
when the system is off.
If problems persist, consult your LAN
administrator.
Operating Basics.
Procedure
Make sure the computer's Wireless
communication switch is set to on.
If problems persist, contact your LAN
administrator.
Operating Basics.
Procedure
Check to ensure the computer's Wireless
Communication Switch is set to on.
Troubleshooting
8-22