6. Slide and hold the battery release latch (2) and then remove the battery
pack from the computer (3).
Installing the battery pack
To install a battery pack, follow the steps as detailed below:
Do not touch the battery release latch while holding the computer or the
battery pack might fall out due to the unintentional release of the battery
release latch and cause injuries.
1. Insert the battery pack as far as it will go into the computer (1).
2. Ensure that the battery pack is securely in place and the battery lock (2)
is in its (
3. Turn your computer over.
User's Manual
Battery pack
Battery lock
Figure 6-1 Releasing the battery pack
) position.
Battery pack
Battery lock
Figure 6-2 Securing the battery pack
Power and Power-Up Modes
Battery
release latch
6-9