Advertisement
Step 2
Mount the USC 5030, with the small cell plug-in modules installed, using the universal bracket (AIR-AP-BRACKET-2).
The USC 5030 can be mounted in several configurations, including on a suspended ceiling, on a hard ceiling or wall, on
an electrical or network box, and above a suspended ceiling.
IMPORTANT SAFETY INFORMATION!
Before use, please ensure that you read the following safety information carefully!
Refer to the USC 5030 Mounting Guide at this URL:
usc5030/mount/usc5030mount.html.
Step 3
Connect one end of the network cable to the USC 5030 Ethernet port and the other end to your broadband router or cable
modem.
Step 4
Connect the power adapter to the power port and to an AC power source.
Step 5
When the USC 5030 boots, it automatically recognizes the installed modules. No software configuration is required.
4
http://www.cisco.com/c/en/us/td/docs/wireless/access_point/small_cell/
Advertisement
