To Rack Mount The Instrument - Cal Power ITech IT6860B Series User Manual

IT6860B User manual
3.
The power input requirements
There are two kinds of working voltage for the power supply: 110V and 220V, so please pay
attention to the working input voltage. There is a power cord which matches with your local
power in the attachment. If that does not match, please do not hesitate to contact with our
authorized dealer or service department.
AC input levels (select by change the AC power switch on the bottom of the power supply)
Option Opt.01: 220VAC ± 10%, 47 to 63 Hz
Option Opt.02: 110 VAC ± 10%, 47 to 63 Hz

1.2 To Rack Mount the Instrument

You can mount IT6860B series power supply in a standard 19-inch rack cabinet using the
IT-E151 rack mount kit.
The procedure:
Remove the carrying handle before rack-mounting the instrument. To remove the handle,
grasp the handle by sides and pull outwards and rotate it to a special position (vertical to the
Power supply), then pull the handle outward. After removing the handle, you can tear the
lables on both side, and then you can see the screw holes.
PIC 1.1 Rack mount a single instrument with rack mount kit IT-E151
PIC1.2 Side view of rack mounting a single instrument
用户使用手册 6