Cal Power ITech IT6860B Series User Manual page 4

IT6860B User manual
Warranty Service
For the warranty service or repair the product, the product must be returned to the
designated maintenance units. Return the product to us for warranty service, the customer
should pre-pay the one-way Freight to the maintenance department. And our company is
responsible for the return shipping cost.
If products are returned from other countries for maintenance service, then the customer
should pay all freight, duties and other taxes.
Guarantee limit
The guarantee does not apply to the damage caused by the following conditions:
Improper or inadequate maintenance to the products by customer;
Customers use their own software or interface;
Unauthorized modification or misuse;
Operate this product not in the specified environment, or at the wrong place configuration
and maintenance.
Damage from Customer self-installation of circuit, or defects due to customers use their
products.
Product model or serial number of the fuselage has been altered, deleted, removed or made
illegible;
Damage caused by accidents including but not limited to lightning, water, fire, abuse or
neglect.
Notice
If the content of this manual is subject to change, we will not notice additionally.
Introduction
IT6860B series power supply is single output dual range DC programmable power supply,
which can replace two ordinary ones. The front panel keys and the control knob provide a
convenient interface for adjusting voltage and current, storing and recalling operation.
Built-in RS232/USB/GPIB communication interface is suitable for either bench or rack
mounted operation. Can be designed and tested according to your needs and provide
multi-purpose solutions.
 Dual range ouput
 VFD display
 Digital keypad operation
 High accuracy and high resolution
 Low ripple and low noise
 Intelligent fan control, energy conservation, noise reduction
 Can be monitored by computer software
 Output voltage and current values accordance with procedure
 Can use the knob to adjust the voltage and current
 Can adjust the numbers steps using the cursor
 Can set the output timer(0.1~9999.9S)
 Standard RS232/USB/GPIB communication interface
 Rich SCPI orders and IT6820 compatiable frame protocol to facilitate the formation of
用户使用手册 4