Current Setting; Output On/Off; Switch The Actual/Setting Value Display; Cc/Cv Mode - Cal Power ITech IT6860B Series User Manual

Enter
button to confirm.

5.4 Current setting

IT6860B series power supply enables customer to set current from 0V to rated value. Press
I-set I-set
button, it will be lit. Now, there are three ways to set the voltage:
Solution1: press
position--------press
Solution2: press
position------adjust the knob to increase or decrease the setting value.
Solution3: press
Enter
button to confirm.

5.5 Output on/off

On/Off
button is used to control the output of power supply. When
represents output has been turned on. If
In output on mode, the indicator light CV or CC will be lit.
Note: Please ensure the power supply and determinand has been connected well and then
On/Off
press button to turn on the output.

5.6 switch the actual/setting value display

Meter Meter
button is used to switch the display between actual and setting value.
Meter Meter
(1) When
VFD will appear a marker of "meter".
Meter Meter
(2) When

5.7 CC/CV mode

According the ohm's law, output current is determined by output voltage and the resistance
of load. When actual current is less than the setting value, power supply will function in CV
mode. And CV status indicator lamp will be lit.
If actual current is above the setting value or rated value, power supply will change to CC
mode, and CC status indicator lamp will be lit.

5.8 Save/Recall

IT6860B series power supply enables customer to store up to 9*8 groups of different
operating parameters in a non-volatile memory.
Each operating parameters includes a constant voltage value, constant current value and
OVP setting value.
You can save or recall parameters by
panel or through command *SAV,*RCL.
用户使用手册
I-set I-set
button-------press
and button to increase or decrease the setting value.
I-set I-set
button------press
I-set I-set
button+ number
button is lit, it shows actual voltage and current on front panel. Meanwhile,
button is dark, it shows setting voltage and current on front panel.
button to adjust the cursor's
button to adjust the cursor's
0 9
to to set the voltage value. Then press
On/Off
button is dark, it indicates that ouput is off.
Recall
(Shift) + (Save)buttons directly from the front
18
IT6860B User manual
On/Off
button is lit, it