Cal Power ITech IT6860B Series User Manual page 24

TRIG=MANU
MEM=GROUP1
TIMER=OFF
List Function (>List Set)
List mode allows you to create a sequence of steps, store it into the power supply's non
volatile memory and execute it. The input parameters for generating a list include the time
unit (min or sec), the step voltage, step current, step time and whether continue to the next
step, repeat count and whether save the file. Each list file can be edit up to 150 steps.
Once a trigger signal is received, the programmed list will be executed once. Once finished,
the instrument will pause until the next trigger signal is received.
Operation:
Generate file:five steps:
1） Press (Shift)
2） VFD displays MAX VOLT, press
3） VFD displays LIST STATE, press
to select >LIST >ON, press
have enables list mode.
4） Press to select LIST EDIT, press
5） VFD displays TIME SEC, press
to select >TIME MIN. Press
MIN,the adjustable range is 0.1~9999.9
6） VFD displays VSET 0.000, press numeric keys
voltage, press
7） VFD displays ISET 0.0000, press numeric keys
current, press
8） VFD displays SEC 0.1, press numeric keys
time press
9） VFD displays NEXT >YES, press
10） Repeat steps from 5）~8) for four times. The last time, when VFD shows NEXT >YES,
press to select NEXT >NO, press
11） VFD displays REPET 1, press numeric keys
cycle counts, press
Repeat count range:1~65535.
12） VFD displays SAVE >NO, press
In this condition, the current list file does not be saved. It can only run once. As long as
you quit the list mode or turn off the unit, the list file will not exist anymore.
You also can press
location for quick recall. Press
There are four memory areas to save a list file (FILE0~FILE3).
13） If you intends not save the list file, VFD will directly display LIST EDIT.
用户使用手册
I-set I-set
（Menu）into menu operation
+
Enter
to confirm.
Enter
to confirm.
Enter
to confirm.
Enter
to confirm.
to select >SAVE FILE0 to save the file into assigned memory
Enter
to select LIST SET，press
Enter
to confirm.VFD displays LIST>OFF, press
Enter
to confirm. Then
Enter
to confirm.
Enter
to confirm. Continue to next step, or press
Enter
to confirm. Note: no matter you select SEC or
0
0
0
to
Enter
to confirm.
Enter
to confirm.
0
to
Enter
to confirm.
to confirm.
24
IT6860B User manual
Enter
to confirm
Enter
button will be lit. You
9
to or adjust rotary knob to set
9
to or adjust rotary knob to set
9
or adjust rotary knobs to set
9
or adjust rotary knob to set