Performing; Loading Tracks - Denon Prime GO User Manual

Performing

Loading Tracks

To load a track to a deck, do any of the following:
• In the Central Library Preview, swipe the track to the left
or right to load the track to the deck on that side.
• In Library View, swipe the track to the right, and then tap
the desired Deck number.
• Highlight the track using the encoder, and then press the
Load / buttons to load the track to the deck on that
side.
• Highlight the track using the encoder, then press the
encoder to bring up the deck selection screen. Turn the
encoder to select the desired deck, and then press the
encoder to load the track to that deck.
To add a track to the Prepare list, swipe the track to the
left while in Library View. Alternatively, hold Shift and press
the Browse knob.
To show a track's information, tap and hold your finger on
it.
While viewing the Prepare list:
• Swipe left to remove the track from the Prepare list.
• Tap the clear button in the upper-right corner of the
display to remove all tracks from the Prepare list.
Swipe Right or Left to Load
Tap and Hold
to Show Info
Swipe Left to Prepare
Swipe Right to Load
15