Platter Display Overview (Sc5000 Only); Performing; Loading & Removing Tracks - Denon SC5000 PRIME User Manual

Platter Display Overview (SC5000 only)

Normally, the platter display shows the following information:
•
the current position of the playhead.
•
the album artwork of the current track.
The platter display temporarily shows the following information:
•
the current size of an auto loop after you turn the Auto Loop knob.
•
the current layer after you press the Layer button.
•
the position of the secondary playhead when Slip is active.

Performing

Loading & Removing Tracks
While viewing any track list:
To load a track to the layer currently in focus
on the deck, swipe the track to the right.
Alternatively, press the Select/Load knob, or
double-tap the track.
To perform instant doubles (load the same
track to both layers on the deck), double-
press the Select/Load knob while the track is
highlighted.
To add a track to the Prepare list, swipe the
track to the left. Alternatively, press and hold
Shift and press the Select/Load knob.
To show a track's information, tap and hold
your finger on it.
While viewing the Prepare list:
To remove a track from the Prepare list, swipe the track to the left.
To remove all tracks from the Prepare list, tap the Clear List icon in the upper-right corner of the
touchscreen.
20