Platter Display Overview; Performing; Loading Tracks - Denon Prime 4 User Manual

Platter Display Overview

Normally, the platter display shows the following information:
•
the current position of the playhead.
•
the album artwork of the current track, or your custom artwork.
The platter display temporarily shows the following information:
•
the current size of an auto loop after you turn the Auto Loop knob.
•
the current layer after you press the Layer button.
•
the position of the secondary playhead when Slip is active.

Performing

Loading Tracks

To load a track to a deck, do any of the following:
• In the Central Library Preview, swipe the track to
the left or right to load the track to the active deck
on that side.
• In Library View, swipe the track to the right, and
then tap Load. Next, tap the deck where you want
the track loaded.
• Highlight the track using the encoder, and then
press the Load / buttons to load the track to
the active deck on that side.
• Highlight the track using the encoder, then press
the encoder to bring up the deck selection screen.
Turn the encoder to select the desired deck, and
then press the encoder to load the track to that
deck.
To add a track to the Prepare list, swipe the track to the
left while in Library View. Alternatively, press and hold
Shift and press the Load / buttons.
To show a track's information, tap and hold your finger
on it.
While viewing the Prepare list:
Swipe left to remove the track from the Prepare list.
Tap the clear button in the upper-right corner of the
display to remove all tracks from the Prepare list.
Swipe Right or Left to Load
Tap and Hold
to Show Info
Swipe Left to Prepare
Swipe Right to Load
18