Advertisement
DC INPUT: Use the supplied 12V DC power supply
HDMI: HDMI Connector
HD Analogue 1 IN: BNC Connector support CVBS/TVI/AHD/CVI
HD Analogue 2 IN: BNC Connector support CVBS/TVI/AHD/CVI
HD Analogue 2 OUT: BNC Connector support CVBS/TVI/AHD/CVI
Set up sequence
1.
Make sure the power of PC and/or Video source were turned off.
2.
Connect the video signal to monitor.
3.
Turns the PC and/or Video source power on.
4.
Plug the power supply to DC jack
(Use reverse sequence to teardown the monitor)
3. Controls and indicators
-
Power
Select input source – HDA1, HDA2, HDMI.
SOURCE:
MENU:
Access the On Screen Display (OSD) menu.
＋ and －: Controls left/right, Change the size of the value.
POWER:
Turns the monitor on or off.
1. To access the OSD Menu press 'MENU'.
2. Press the 'SOURCE' buttons to select the function, then press the '＋' or '－'button to
select the sub menu.
3. Press the 'SOURCE' button to confirm the sub menu, then press '＋' or '－' to adjust
the setting.
4. Press the 'MENU' button to return to previous menu.
5. Press the 'MENU' button again to exit the OSD Menu.
+
Menu
Source
6
Advertisement
