Error Message Examples - Toshiba Qosmio G35 User Manual

Error message examples

The following error messages may be displayed on the
TOSHIBA RAID Console.
Not enough memory available.
Increase the available memory by shutting down one or more
applications.
Another user is working in administrator mode.
Currently unable to use it.
Another user is logged onto the computer as an administrator
and using the TOSHIBA RAID Console utility.
Only one administrator can use the TOSHIBA RAID Console
utility on your computer at one time.
The number of connectable units has been exceeded.
Currently it will not connect to the RAID service as
another user is using it.
Only one instance of the TOSHIBA RAID Console utility
can be opened on your computer at one time.
Unable to setup RAID, as the disk is in use.
Shut down the application currently in use and then set up
RAID.
A failure has occurred in the array. Please press the
button to stop the beep.
The configured mirroring on the disk appears to be abnormal.
Check the status of the array by starting the RAID Console. It
is necessary to replace the physical drive if the physical drive
has failed.
Using the RAID-0 or RAID-1 Utility
Error message examples
281