Wireless Networking Problems - Toshiba PORTEGE R500 Series User Manual

Run the printer's self-test to check for any problem with the printer
itself.
Make sure you installed the proper printer drivers as shown in
"Setting up a printer" on page 70
with the printer.
You may have connected the printer while the computer is on.
Disable Standby mode, turn off the computer, and turn off the
printer. Turn the printer back on, make sure it is online, and then
turn the computer back on.
Try printing another file. For example, you could create and attempt
to print a short test file using Notepad. If a Notepad file prints
correctly, the problem may be in your original file.
If you cannot resolve the problem, contact the printer's
manufacturer.
The printer will not print what you see on the screen.
Many programs display information on the screen differently from
the way they print it. See if your program has a print preview mode.
This mode lets you see your work exactly as it will print. Contact
the software manufacturer for more information.

Wireless networking problems

NOTE
❖
If your computer is equipped with an internal Wi-Fi
verify that the Wi-Fi
will be lit).
NOTE
❖
Verify that signal strength is good using the utility provided
with the Wi-Fi
This section provides general troubleshooting tips for networking
problems, specifically wireless (Wi-Fi
The terms and concepts used assume a basic understanding of
networks, and may be for more advanced users. If you need
assistance or if you are not familiar with the terminology, please see
®
Windows Help and Support or contact your computer technician.
To determine if your computer has an internal Wi-Fi
the device list in Device Manager (part of the Windows
Panel). Some Toshiba models may have a Wi-Fi
even though they do not have an internal Wi-Fi
®
adapter.
If Something Goes Wrong
Resolving a hardware conflict
or in the instructions that came
®
antenna switch is on (the Wi-Fi
®
) networking.
®
®
adapter, check
®
®
antenna switch
®
adapter.
189
adapter,
®
light
Control