Advertisement
3. Secure the PDC.
Scenario 1
Scenario 2
NOTE
(Optional) When the PDC installation environment is 5# channel steel and that the PDC cannot be
secured using the mounting holes, secure the PDC using the mechanical part shown in the
following figure.
(Optional) Combine cabinets
2.3
1. Open the front and rear doors.
Wrench the anchor bolts using
an adjustable wrench to adjust
the cabinet height.
2. Remove the cabinet
connecting kits from the rack.
3. Screw the connecting kits in
the connection positions on
the front door.
4. Use the same method to
secure the connecting kit in
the connection positions on
the rear door.
5. Repeat the preceding steps to
combine other PDCs.
6. Use a torque socket wrench to
tighten the bolts in diagonal
order.
NOTE
When combining cabinets, ensure that all cabinet
surfaces are at the same level.
4
Advertisement
