IBM Power System 9009-41A Manual page 139

Figure 120. Control panel display cable path for a rack-mounted system
4. For the stand-alone system, insert the control panel display cable into the system as shown in Figure
121 on page 126 and Figure 122 on page 127.
a) Pull any cable slack inside the system in the direction shown in Figure 122 on page 127 to prevent
the cable from interfering with the fan.
5. Secure the control panel display housing to the system using the two screws (A) as shown in Figure
121 on page 126.
Control panel cables for the 9009-41A, 9009-42A, or 9223-42H 125