Lenovo SE350 Configuration & Installation Manual page 4

Remove the bookshelf configuration
To remove the bookshelf configuration, complete the following steps.
Note: Reserve 500 mm empty space in front of the node so that you can have sufficient space to install and remove the node.
1.
Use the key to unlock the security bezel.
2.
Press the release tab and pivot the security bezel outward to remove it from the node sleeve.
3.
Repeat the step 1 and step 2 if you have more security bezels to remove.
4.
Loosen the two thumbscrews and slide the node out of the node sleeve. Repeat the step if you have more nodes to remove.
4