Lenovo SE350 Configuration & Installation Manual page 2

3.
Align the left bookshelf with the node sleeve and slightly push the bookshelf rightward to hook the six T-pins into place; then,
fasten the two screws.
4.
Align the node with the node sleeve and slide the node into place; then, fasten the two thumbscrews. Repeat the steps if you
have more nodes to install.
5.
Carefully insert the tab on the security bezel into the slot; then, pivot the security bezel inward until the other side clicks into
place.
6.
Use the key to lock the security bezel.
7.
Repeat the step 5 and step 6 if you have more security bezels to install.
2