Toshiba Satellite P200 Series User Manual page 130

General
This window displays the BIOS version and contains two buttons:
Default
About
Setup
This field displays BIOS Version and date.
When finish BIOS update , please restart your computer and press F2 into
BIOS setup manual and load BIOS default one time
Password
This tab allows you to set or reset the user password for power on.
Display
This tab lets you customize your computer's display settings for either the
internal LCD screen or for an external monitor.
Power On Display
This option allows you to select the display to be used when the computer
is switched on.
Auto-Selected
LCD + Analog RGB
CPU
This function lets you set the CPU operating mode.
This option is displayed only for Core Duo/Solo processor based model.
Dynamic CPU Frequency Mode
This option lets you choose from the following settings:
Dynamically
Switchable
Always Low
7-2
Return all HW Setup values to the factory settings.
Display the HW Setup version.
Selects an external monitor if one is connected.
Otherwise, it selects the internal LCD (Default).
Selects both the internal LCD and external
monitor for simultaneous display.
CPU power consumption and clock speed
automatic switching function is enabled. When
the computer is in use, CPU operation is
automatically switched when necessary (Default).
CPU power consumption and clock speed
automatic switching function is disabled. The
CPU always runs at low power consumption and
low speed.
.
Satellite P200/Satellite Pro P200
HW Setup