Hibernation Mode - Toshiba Satellite P200 Series User Manual

Benefits of Sleep Mode
The Sleep Mode feature provides the following benefits:
■
Restore the previous working enviroment more rapidly than does the
Hibernation Mode feature.
■
Saves power by shutting down the system when the computer receives
no input or hardware access for the time period set by the System Sleep
Mode feature.
■
Allows the use of the panel power off feature.
Executing Sleep Mode
You can enter also Sleep Mode by pressing Fn + F3 - please refer to
Chapter 5, The Keyboard, for further details.
Youu can enter Sleep Mode in one of three ways:
1. Click Start then click the sleep button (
management buttons (
select Sleep from the menu.
2. Close the computer's LCD display panel. Please note that this feature
must be enabled - please refer to the Power Options (to access it, click
Start followed by Control Panel followed by System and Maintenance
and then click the Power Options).
3. Press the power button. Please note that this feature must be
enabled - please refer to the Power Options (to access it, click Start
followed by Control Panel followed by System and Maintenance and
then click the Power Options and point to Choose what the power button
do).
When you turn the power back on, you can continue where you left when
you shutdown the computer.
■
When the computer is in Sleep Mode, the power indicator will blink
orange.
■
If you are operating the computer on battery power, you can lengthen
the overall operating time by turning it off into Hibernation Mode - Sleep
Mode will consume more power while the computer is off.
Sleep Mode limitations
Sleep Mode will not function under the following conditions:
■
Power is turned back on immediately after shutting down.
■
Memory circuits are exposed to static electricity or electrical noise.

Hibernation mode

The Hibernation Mode feature saves the contents of memory to the hard
disk drive when the computer is turned off so that, the next time it is turned
on, the previous state is restored. Please note that the Hibernation Mode
feature does not save the status of any peripheral devices connected to the
computer.
3-6
) located in the power
), or click the arrow button (
Satellite P200/Satellite Pro P200
Getting Started
) and