Wearing The Helmet; Putting On The Helmet; Removing The Helmet - Sena CAVALRY LITE User Manual

General
Information
Product
Details
Wearing
the Helmet
Pre-Ride
Helmet
Inspection
accessory
Installation:
Ear Plates
accessory
Installation:
Ear Pads
1. About the
CAVALRY LIte
bLuetooth hALf
heLmet

1.3 Wearing the Helmet

1.3.1 Putting on the Helmet

1. Unfasten the chinstrap.
2. Gently pull the padded V-straps outward
and slide the helmet onto your head.
Note: A "chinstrap" is the nylon webbing
that goes through the D-Rings.
3. Route the chinstrap under your chin, then
thread it through both D-Rings.
4. To fasten securely, thread chinstrap back
through the D-Ring closest to your neck,
and pull.
Thread through
the D-Rings
Chinstrap
Note: Check the chinstrap's position and
tension regularly to ensure proper fit.

1.3.2 Removing the Helmet

1. Loosen the chinstrap by pulling the red tab
attached to the D-Rings.
2. Pull the chinstrap out from within the
D-Rings.
3. Gently pull the padded V-straps outward
and slide the helmet off your head.
advice: Fastening the chinstrap after
removing the helmet will help avoid
scratching surfaces it's placed upon.
Sena Cavalry Lite Bluetooth
mENU
Half Helmet | 10
®