Bosch Rexroth Sytronix FcP 50 Series Operating Instructions Manual page 48

46/143 Bosch Rexroth AG
Transport and Storage
LSA Control S.L. www.lsa-control.com comercial@lsa-control.com (+34) 960 62 43 01
Rexroth Sytronix FcP 50xx/70xx Motor-Pump Unit MPES2
A10VZO/A4VSO
Bearing time / months
Measures for storage
< 12 < 24 > 24
Coat the inner side of the axial piston unit with mineral oil by filling
●
in approx. 100 ml mineral oil.
Fill in anticorrosion agents VCI 329 (20 ml) into the axial piston
● ●
unit.
1. Filling must be done via the tank connection L or L1, refer to
Rexroth Sytronix, Assembly and Commissioning, Axial Piston
Variable Pump A10VZO/A10VSO/A4VSO, material number:
R911341628.
2. Hermetically seal all connections.
3. Coat all unpainted surfaces of the axial piston pump with miner‐
al oil.
4. or suitable, easy to remove anticorrosion agents, e.g. acid-free
grease.
5. Hermetically pack the axial piston pump and a drying agent into
anticorrosion foil.
6. Store the axial piston pump shockproof.
Measures for commissioning
Before mounting, check the complete axial piston pump for dam‐
● ● ●
age and corrosion.
At a test run, check the axial piston pump for functionality and
● ● ●
leakproofness.
● Change the shaft sealing ring.
After the maximum storage time (24 months) we recommend a
● preventive check of the axial piston pump by the responsible
Rexroth service!
Tab. 6-10: Measures for storage and before commissioning axial piston pumps
that have been stored over a prolonged period of time
DOK-SYTROX-MPES2******-IT01-EN-P