30/143
Bosch Rexroth AG
About this Product
5.2.4
Axial Piston Pump A10VZO
5.2.5
Coupling and Bellhousing
5.2.6
Standard Asynchronous Motor MOT-FC
5.2.7
Pump Foot
LSA Control S.L. www.lsa-control.com comercial@lsa-control.com (+34) 960 62 43 01
Rexroth Sytronix FcP 50xx/70xx Motor-Pump Unit MPES2
You will find more details about operation conditions, connection conditions
and power limits in the data sheet RE 91485.
Fig. 5-5:
Axial piston pump A10
Driving shaft (1), retraction plate (2), high pressure side (3), control unit (4),
connection plate (5), suction port (6), low pressure side (7), cylinder (8), pis‐
ton (9), slide shoe (10), pivoting cradle (11)
The pump and the motor are connected together with the coupling and the
bellhousing. Additionally, an optional pump foot is fastened on the bellhous‐
ing or the motor-pump unit is directly connected with the system.
Depending from the size and fastening mode of the motor-pump unit, differ‐
ent couplings and bellhousings are available.
For motor-pump units, MOT-FC motors with key shaft are used.
The optional pump foot is fastened on the bellhousing of the motor-pump unit
and serves to assemble the motor-pump unit in the system.
DOK-SYTROX-MPES2******-IT01-EN-P