Advertisement
Red Right channel positive (R+)
Black Right channel negative (R-)
Adjust the cartridge's position to make sure it is precisely aligned on
6.
the headshell so that the stylus will be tracking the grooves in parallel
perfectly.
To achieve this, place the included paper cartridge alignment
protractor over the turntable spindle, carefully lift the tone arm and
place the tip of the stylus on the points marked 130mm and 250mm
respectively. Fine tune the cartridge's position on the headshell until
the cartridge is perfectly in parallel with the reference lines at both
points.
Tighten the screws completely once the perfect alignment is achieved.
7.
NOTE: If you are unfamiliar or uncomfortable with completing this procedure,
we recommend consulting with a professional to perform the installation.
Technical Specifications:
Nominal Speeds
Speed Variance
Wow and Flutter
Signal to Noise
Down force Range
Effective Tonearm Length
Overhang
Power Consumption
Outboard Power Supply
Dimensions (W x H x D)
Weight
Technical Specifications: AT-3600L (audio-technica)
33 1/3 & 45RPM
±1%
≤0.15%
55dB
3.0-6.0g
8.6" (218.5mm)
0.73in
5W (Max)
12V/500mA
420 x 360 x 125mm
4.8kgs
19
AC-DC
Advertisement
