Information; Conformity, Environment And Safety; Using Gap - Philips DECT3111B/51 User Manual

Information

Conformity, Environment and Safety

Safety information :This equipment is not designed to make emergency calls when the power fails. An
alternative has to be made available to allow emergency calls.
Conformity : Hereby, PHILIPS, declares that DECT 311XX is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC (See p. 43).
This product can only be connected to the analogue telephone network of the UK and Ireland.
Power requirements : This product requires an electrical supply of 220-240 volts, alternating
monophased power, excluding IT installations defined in standard EN 60-950.
In case of a power failure the communication can be lost.
Warning ! The electrical network is classified as hazardous according to criteria in the standard EN 60-
950.The only way to power down this product is to unplug the power supply from the electrical outlet.
Ensure the electrical outlet is located close to the apparatus and is always easily accessible.
Telephone connection : The voltage on the network is classified as TNV-3 (Telecommunication
Network Voltages, as defined in the standard EN 60-950).
Safety precautions : Do not allow the handset to come into contact with water. Do not open the
handset or the base station.You could be exposed to high voltages. Do not allow the charging contacts or
the battery to come into contact with conductive materials.
Environmental care : Please remember to observe the local regulations regarding the disposal of your
packaging materials, exhausted batteries and old phone and where possible promote their recycling.
Using GAP standard compliance
base stations comply with a minimum operating standard irrespective of their make.Your DECT 311
handset and base station are GAP compliant, which means the minimum guaranteed functions are :
register a handset, take the line, receive a call and dial.The advanced features may not be available if you
use another handset than an DECT 311 with your base station.
Unpacking DECT 311/DECT3112
The DECT 311 package contains :
NiMH 2HR
AAA600 mAh
rechargeable
Batteries
A power supply
In the DECT 3112 pack you will find one more additional handset and its charger & power supply,
together with additional NiMH 2HR AAA 600 mAh rechargeable batteries.
6
http://www.philips.com/faqs/dect
:
The GAP standard guarantees that all DECT
A base station
A user guide
A line cord
Information
A handset
1
A guarantee
GAP handsets and
TM