Advertisement
Available languages
Available languages
3. Installation
Warning! Do not leave the packaging materials (plastic bags, polystyrene, nails etc.) within
reach of children as they represent potential hazards.
Warning! Electrical devices may only be operated in wet rooms connected to a residual
current circuit breaker.
Warning! Before initial operation of the device please ensure that this connection is provided
at the planned connection location.
Warning! The installation location must be selected so that the devices cannot be sprayed
with water or fall into water in any event.
Warning! This device is only approved for connection to 110VAC, 50/60Hz AC Voltage. It
must be protected from heavy soiling and moisture. Different uses to those described above
can lead to damage to the device, e.g. short circuit, electric shock etc. Always follow the
safety and installation instructions.
Warning! The device must be disconnected from the mains supply when opening the cover
or removing parts. Only transport it using the carrying handle that is designed for this purpose.
Please note! Lay the connection cables in such a way that nobody can trip over them and
they cannot be crushed or come into contact with hot objects.
Please note! Only use extension cables that are compatible with the output and in
accordance with the valid safety regulations for the device.
Please note! Make sure that the devices are disconnected from the mains power before and
during installation.
8
Advertisement
