Download Print this page

Bio Green PALMA Installation And Operating Instruction page 10

Aircirculation heater

Advertisement

Available languages

Available languages

3.2 Installation of Palma heater
Warning! The distance from the inflammable objects should be at least 20". Adjust the
heater so that there is a distance of at least 16" between the wall and the air intake opening.
Warning! A free space of 1.5 meters should be left in front of the output opening if possible.
Place the heater in your greenhouse (4).
Warning! Never install the device close to taps, wash basins or other water sources.
Warning! Only use this device indoors.
Warning! Do not cover the heater.
Warning! Do not insert any objects into the openings on the device as this risks injury,
electric shock or damage to the device.
This heater is for use on 110VAC, 50/60Hz.
different voltage. The cord has a plug as shown at A in below figure. An adapter as shown at C is
available for connecting three-blade grounding-type plugs to two-slot receptacles. The green
grounding lug extending from the adapter must be connected to a permanent ground such as a
properly grounded outlet box. The adapter should not be used if a three-slot grounded receptacle
is available.
Warning! Never try to operate the device using a
10

Advertisement

loading