Bio Green PALMA Installation And Operating Instruction page 11

Now insert the mains plug into the socket of the Thermo 2(5) or, if operating without the
Thermo 2, directly into the mains socket (6).
Warning! Never insert or remove the power plug with wet hands. When using a multiple socket
or an extension cable please ensure that the maximum current carrying capacity is not exceeded.
Cable drums must always be completely unrolled. Do not wrap the connection cable around the de-
vice and never operate the device with wound cable. Never pull the power cord itself; only remove
the plug from the socket holding the grips on the mains plug.
To set the Palma RAW to wintermode, see section 4.2.
To set the Palma to wintermode, see section 4.3.
To set the summer mode, see section 4.4.
Image 5
Image 6
11