Cleaning, Maintenance, Environment And Disposal - Bio Green PALMA Installation And Operating Instruction

Aircirculation heater

Available languages

5 Cleaning, maintenance, environment and disposal

5.1 Cleaning and maintenance

Warning! Switch the device off before each cleaning and leave it to cool for approximately 30

minutes before beginning cleaning.

als. Clean the casing with a damp cloth (not wet), vacuum cleaner or feather duster.

5.2 Environment and disposal

Please note! Only dispose of devices at a corresponding collection centre.

Please note! Only authorized specialists are permitted to carry out repairs on the device.

Please contact the manufacturer or distributor in this regard.

Warning! Incorrectly executed repairs can represent a hazard for the user and other persons.

The manufacturer does not accept responsibility for any damage caused by frost, insufficient heating

performance for the room dimensions or insufficient heat insulation.

6. MANUFACTURER'S REPRESENTATIONS AND WARRANTIES

CTL

c/o Bio Green Inc.

2881 Busse Road,

Elk Grove Village, IL 60007

United States

Email: info@biogreen-products.com

These Representations and Warranties are applicable to all customers (the "Customers" and

each, individually, a "Customer") purchasing products (the "Products") manufactured by Bio

Green oHG (the "Company").

1. Warranty and Limitations:

1.1. Company warrants solely to the original purchaser of the Products that for the Warranty

Period (as defined below), the Products will be free from defects in materials and workmans-

hip under normal use, and will conform to Company's published specifications of the Products.

Notwithstanding the foregoing, Company retains its right to deviate from its published specifi-

cations due to the latest innovations and improvements in function and design of the Products.

1.2. The foregoing warranty is subject to the proper storage, transportation and use of the Pro-

ducts, and does not include defects due to normal wear and tear or deterioration.

1.3. Customer shall immediately, but in any event no later than eight (8) days following deli-

very of the Product, inspect the Products for conformity and visible defects. Customer shall

give Company immediate written notice of any non-conformities or visible defects regarding

Warning! Do not use any abrasive, caustic or cleaning materi-