Table of Contents
Advertisement
Inserting / Replacing battery pack / Telephone connection
✦
Warning:To insert battery pack and /or to connect your telephone, please refer to the
drawings printed on the inside cover.
With the help of the installation drawings :
1.- Plug the line cord (A) into the line socket on your DECT 214 base station.
Plug the power cable (B) into the power socket on your DECT 214 base station.
Plug the power supply unit into the wall socket.
Connect the telephone line cord into the wall socket.
2.- Open the battery door on the handset by sliding it down.
3.- Connect the battery pack to the connector inside the handset. Place the battery pack with
sticker face up and wires along the left side of the battery pack.
4.- Replace the battery door.
5.- Put the handset on the base and charge for 24 hours before use.
Charging / Recharging the telephone
✦
On first use or when inserting a new battery, charge the battery with the handset for
least 24 hours.
This ensures optimal battery life reached after 3 cycles of charge/uncharge.
The battery needs to be charged if you hear a beep when using the telephone.
The battery life is about 300 hours in stand-by time and 18 hours in communication.
Configuring the phone for use
✦
Don't change your configuration code if you live in UK or Northern Ireland.Your
product is already factory configured with the right settings.
Warning
: This product is ONLY designed to be used in countries LISTED below.
Country
Northern Ireland
UK
Warning :
If you live in the country in the table below, you must enter the relevant
configuration code using the key sequence shown followed by your country code.
Rep. of Ireland
For Example to configurate for Republic of Ireland :
Advice :
If you have bought your product in any of the above countries but want to use it
in another one, you can enter the configuration code, according to the above tables, in order
to activate the right country settings. Nevertheless, you have to change the telephone line
cord adapter according to the country where you want to use it.
Installing your telephone
(See battery status icon on page 4.)
at
Code
44
44
153
dial 153
www.philips.com/faqs/dect
1
Advertisement
Table of Contents
