Installing Your Telephone - Philips Kala 300 Quattro User Manual

✦ Inserting / Replacing battery / Telephone connection
Warning :To insert the battery and/or to connect your telephone, please refer
to the drawings printed on the inside cover and on the lip inside the box.
With the help of the installation drawings :
G Open the battery door by sliding it down,
G Connect the battery pack to the connector inside the handset,
G Place the battery with sticker face up and wires along the left side of the
battery pack,
G Replace the battery door.
✦ Charging / Recharging the telephone (See battery status icon on page 2.)
On first use or when inserting a new battery, charge the battery with the handset for at
least 24 hours. This ensures optimal battery life reached after 3 cycles of charge/uncharge.
The battery needs to be charged if you hear a beep when using the telephone.
✦ Configuring the phone for use
Don’t change your configuration code if you live in one of the countries in the top part
of the table below. Your product is already factory configured with the right settings.
Warning : This product is ONLY designed to be
used in countries LISTED below.
Country
Northern Ireland
UK
Warning : If you live in the country in the table below, you must enter the relevent
configuration code using the key sequence shown followed by your country code.
Rep. of Ireland
For Example to configurate for Republic of Ireland :
Advice : If you have bought your product in any of the above countries but want to use it
in another one, you can enter the configuration code, according to the above tables, in
order to activate the right country settings.
4

Installing your telephone

WXYZ
WXYZ
WXYZ WXYZ
WXYZ
WXYZ
dial 153
Code
44
44
153