Installing Your Telephone; Inserting / Replacing The Batteries - Philips Kala User Manual

CHOOSING THE POSITION FOR THE CHARGING UNIT
To reduce any risks of interference, avoid placing the charging unit less than 1 metre from another
electrical device (telephone, television, computer, etc.). The charging unit must be placed on a flat
surface.
Avoid placing the charging unit:
- in a damp room,
- near a heat source,
- near obstacles like thick walls or metal structures.

INSERTING / REPLACING THE BATTERIES

The batteries contain Cadmium and should be disposed of in accordance with the
regulations in force concerning the disposal of waste.
Never use non-rechargeable batteries. The manufacturer disclaims all responsibility if
Cd
these recommendations are not respected.
WALL MOUNTING THE CHARGER UNIT
12

INSTALLING YOUR TELEPHONE

Your handset is powered by 2 rechargeable AA/R6 batteries.
If you need to replace them, you should use PHILIPS
R6 NC-P or Saft RC6 batteries.
1 ð Press the top of the battery cover and slide it
2 ð Insert the batteries, taking care to respect the marked
3 ð Close the cover.
1 ð Fix the screws (not supplied) as shown in the diagram.
2 ð Connect the power supply cable to the charging unit.
3 ð Mount the charging unit on the screws.
4 ð Plug the mains adaptor into the wall socket.
5 ð Place the handset on the charging unit.
Only use the cables supplied with the product.
downwards.
polarities.