Hitachi GP 10DL Handling Instructions Manual page 33

Provided attachments
<Uses>
Use for wood engraving and
grinding.
Use to machine hard materials
such as glass and ceramics.
Use to engrave, grind and
make grooves in wood, plastic
and soft metals (aluminium,
copper, brass).
Use to make holes in wood
and plywood.
Use to slice or cut materials.
Suitable for cutting thin rods
and pipes.
Recuts crushed grooves in
screw heads.
Do not press hard against
workpiece as it may crack.
Use to polish hard materials
such as stainless steel.
Suitable for fi nal polishing
after rough grinding.
Use to give smooth fi nish to
metal surfaces.
Use for mirror polishing of
jewelry and metals.
Choose the size to suit the
workpiece.
Suitable for tasks such as
shaping wood and fi nishing
models.
Grind in two stages with
diff erent grit numbers to
achieve a good surface fi nish.
Aluminium oxide point [φ15.9 mm × 1]
15.9 mm
Silicon carbide point [φ4.8 mm × 1]
4.8 mm
High-speed cutter [φ3.2 mm × 1]
3.2 mm
Drill [φ3.2 mm × 1]
3.2 mm
Cutting wheel [φ23.8 × t0.6 × 6]
23.8 mm
0.6 mm
Cutting wheel [φ23.8 × t1.0 × 2]
23.8 mm
1.0 mm
Aluminium oxide grinding wheel
[φ22.2 × 1]
22.2 mm
Sanding disc [φ19.1 mm/180-grit × 10]
19.1 mm 180-grit
Polishing wheel [φ25.4 mm × 2]
25.4 mm
Felt polishing wheel [φ12.7 mm × 4]
12.7 mm
Felt polishing wheel [φ25.4 mm × 2]
25.4 mm
Sanding band [φ12.7 mm/60-grit × 6]
12.7 mm
60-grit
Sanding band [φ12.7 mm/120-grit × 2]
12.7 mm
120-grit
33
CAUTION
Standard attachments are
exclusively for use with the
GP10DL. Do not use with
other equipment such as
electric drills, etc. Doing
so may result in injury or
damage to the tip tool.
[Accessory]
Collet spanner (for loosening
tight collet nuts)
Wheel mandrel
[φ3.2 mm × 1]
Screw-type mandrel
[φ3.2 mm × 1]
Drum mandrel
[φ3.2 mm × 1]
English