Table of Contents
Advertisement
English
(1)
Pivot the lever to open the blade clamp.
(2)
Insert the saw blade all the way into the small slit
of the blade holder with the lever pivoting. You
can mount this blade either in the upward or
downward direction. (Fig. 6, Fig. 7)
(3)
When you release the lever, the spring force will
return the lever to the correct position
automatically.
(4)
Pull the back of the saw blade two or three
times by hand and check that the blade is
securely mounted . (Fig. 8)
CAUTION
When pulling the saw blade, be absolutely
sure to pull it from the back. Pulling other
parts of the blade will result in an injury.
3.
Dismounting the blade
CAUTION
Never touch the saw blade immediately
after use. The metal is hot and can
easily burn your skin.
(1)
After pivoting the lever, point the blade
downward. The blade should fall out on its
own. If the blade fails to fall out, pull it out by
hand.
WHEN THE BLADE IS BROKEN
Even when the saw blade is broken and remains inside the small slit of the blade holder, it
should fall out when the lever is pivoted and the blade is pointed downward. If the blade
fails to fall out on its own, take it out by using the procedures described below.
(1)
If a part of the broken saw blade is sticking out of the small slit of the blade holder, pull out
the protruding part and take the blade out.
(2)
If the broken saw blade is hidden inside the small
slit, hook the broken blade using a tip of another
saw blade and take it out. (Fig. 9)
Slit of blade holder
1
Lever
Slit of blade holder
1
Lever
Lever
1
slit
Lever
36
Blade
2
Fig. 6
Blade
2
Fig. 7
Blade
2
Fig. 8
Another blade
Fig. 9
Advertisement
Chapters
Table of Contents
