Important; Power Requirements; Conformity; Using Gap Standard Compliance - Philips SE4451S/05 User Manual

1

Important

Take time to read this user manual before
you use your telephone. It contains important
information and notes regarding operating
your telephone.
1.1

Power requirements

• This product requires an electrical supply
of 220–240 volts, alternating monophased
power, excluding IT installations defined in
standard EN 60-950. In case of power
failure, the communication can be lost.
• The electrical network is classified as
hazardous according to criteria in the
standard EN 60-950. The only way to power
down this product is to unplug the power
supply unit from the electrical outlet.
Ensure the electrical outlet is located close to
the apparatus and is always easily accessible.
• The voltage on the network is classified
as TNV-3 (Telecommunication Network
Voltages), as defined in the standard
EN 60-950.
Warning
w
• This equipment is not designed to make
emergency calls in the event of a power
failure. An alternative has to be made available
to allow emergency calls.
• High voltage. Never open the product or
attempt any repair.
• Keep the product away from liquid.
• Never use any battery type other than the
one supplied. There is a risk of explosion if the
batteries are replaced by an incorrect type.
• When the phone is ringing avoid holding
the earpiece too close to your ear as it may
damage your hearing.
• Do not use the product in places where there
are explosive hazards.
• Do not let small metal objects come into
contact with the product. This can deteriorate
audio quality and damage the product.
4
• Handsfree activation could suddenly increase
the volume in the earpiece to a very high level:
make sure the handset is not too close to
your ear.
• Refer also to the Cautions in chapters and
subchapter sections.
1.2

Conformity

Hereby, Philips Consumer Electronics, declares
that this SE445x is in compliance with the
essential requirements and other relevant
provisions of Directive 1999/5/EC.
The declaration of conformity is available at:
www.p4c.philips.com.
This product can only be connected to the
analogue telephone networks of the countries
mentioned on the packaging.
1.3

Using GAP standard compliance

The GAP standard guarantees that all DECT
GAP handsets and base stations comply with
a minimum operating standard irrespective of
their make.Your handset and base station are
GAP compliant, which means the minimum
guaranteed functions are: register a handset,
take the line, receive a call and dial.
The advanced features may not be available
if you use another handset than a SE440/445
with your base station. To register and use
your SE440/445 handset with a GAP standard
base station of a different make, first follow
the procedure described in the manufacturer's
instructions, then follow the procedure
described on page 23.
To register a handset of another make to
the SE440/445 base station, place the base
station into registration mode, then follow the
procedure in the manufacturer's instructions.
Important Important