Using Your Se445; Calls; Make A Call; Pre-Dial - Philips SE4451S/05 User Manual

4

Using your SE445

4.1

Calls

4.1.1

Make a call

r
Press .
1
Dial the telephone number.
2
4.1.2

Pre-dial

Enter the phone number (maximum 24
1
digits). If you make a mistake press
r
Press to dial the phone number entered.
2
4.1.3

Dial one touch numbers 1 to 9

Press and hold a key from
1
the number is displayed and dialled.
If no number is stored, you hear a beep.
4.1.4

Call from the phonebook

d
Press .
1
The first entry in the phonebook is displayed.
u d
Scroll or
2
r
Press to dial the number.
3
Tip
t
Instead of scrolling to browse the phonebook
entries, press the numeric key corresponding to
the first letter of the entry you wish to locate.
For example, pressing
starting with A. Pressing
entries starting with B, etc...
4.1.5

Call waiting

If you have subscribed to Call Waiting service,
the earpiece will emit a beep tone to inform
you that there is a second incoming call. The
number or name of the second caller will also be
displayed if you have subscribed to Caller Line
Identification service (CLI). Please contact your
network provider for more information on this
service. To answer the second call, press
4.1.6

Call from the call log

Note
n
You need to subscribe to your network's Caller
Line Identification service to be able to see the
12
>
1 9
to
to the entry you want.
2
will show the entries
again will show the
2
r
caller's number in the call log. See 'Call log' on
page 17 for more details.
u
Press
1
the options to access CALL LIST or ANSW
MACHINE. Press
The first entry in the call list is displayed.
u
Scroll
2
r
Press
3
4.1.7

Answer a call

When the phone rings and
1
display, press
.
the call via the loudspeaker.
Warning
w
When the phone is ringing, avoid holding the
earpiece too close to your ear as it may damage
until
your hearing. Handsfree activation can suddenly
increase the volume in the earpiece to a very
high level. Make sure the handset is not too
close to your ear.
Note
n
If you have subscribed to your Network's
Caller Identity service and assigned a VIP Group
to the caller's number, the caller's details are
displayed before the phone starts ringing (see
'Store an entry' on page 14 and 'Group melody'
on page 20). You can set your phone to give the
default ringtone as soon as the call is received
then once the caller's identity is displayed, the
assigned ringtone will start. See 'First ring', page 20.
Tip
t
If Auto Pick up mode (see page 21) is on, simply
lift up the handset from its base to answer the
call. The default setting is off, in which case you
will need to press
Note
n
An incoming call has priority over other events.
Whenever there is an incoming call, other
operations in progress such as phone settings,
menu navigation, etc. will be ended.
.
4.1.8

Adjust volume

During a call, press
1
the earpiece or loudspeaker volume.
The level is shown in the handset display.
to enter CALL LOG menu. You have
m
to enter CALL LIST.
d
or to the entry you want.
to dial the number.
P
r v
or press
r
to answer a call.
u d
or
flashes in the
to answer
to adjust
Using your SE445