4.1.9
Mute
Mute the microphone so that you can talk to
someone else in the room without your caller
hearing you.
During a call, press
1
The microphone is muted.
>
Press
again to turn the microphone
2
back on.
4.1.10 End a call
e
Press
.
1
After you hang up, the duration of your call is
displayed for 5 seconds.
Note
n
If auto hang-up is on (see page 21) simply
replace the handset on the base to end the call.
The default setting is ON.
4.1.11 Switch handset on/off
e
Press and hold
1
switches off.
e
Press and hold
2
handset back on.
4.2
Call a second external number
Put an external caller on hold to make a second
external call. You can then switch between both
callers or hold a 3-way conference call.
During your call, press
1
INIT 2ND CALL.
m
Press
.
2
Display shows CALLING R
Enter the second number.
3
When your second caller answers, press
4
m
to open the option menu:
CONFERENCE – press
with an external caller and internal caller.
SWITCH CALLS – press
between the two callers.
e
Press
to hang up.
5
Using your SE445
>
.
until the handset
again to switch the
m
d
. Scroll
m
to initiate a 3-way
m
to switch
4.3
Intercom
This feature is only available when there are
at least 2 registered handsets. It allows you to
make internal calls, transfer external calls from
one handset to another and use the conference
option.
4.3.1
Call another handset
c
Press
1
• If you have two handsets, the other handset is
called automatically.
• If more than two handsets are registered
to the base, their numbers are displayed,
e.g. 2345*. Enter the number of the handset
you want to call or press
handsets.
e
Press
2
Note
n
If the handset does not belong to SE440/445
range, this function may not be available.
4.3.2
Transfer an external call to
another handset
During an external call, press
1
Your caller is put on hold.
Enter the number of the handset you want to
2
call or press
If there are only two handsets, the other handset
to
is called automatically.
When the other handset answers, announce
3
the caller then press
If the other handset does not answer, press
c
to talk to your caller again.
4.3.3
Switch between an internal and
external call
During an external call, press
1
Your caller is put on hold.
Enter the number of the handset you want to
2
call or press
If there are only two handsets, the other handset
is called automatically.
.
*
to ring all
to hang up.
*
to ring all handsets.
e
to transfer the call.
*
to ring all handsets.
c
.
c
.
13