Pump, Dhw Cylinder Circuit - Danfoss VX Solo II Series Instructions For Installation And Use Manual

Instructions for installation and use
Actuator + valve, unit with electronic control of the heating and
DHW cylinder circuits
For controlling the domestic hot water circuit the VX Solo II HWP
(ELC 210/A247) and the VX Solo II H2WP (ECL 310/A377) are sup-
plied with electrical actuator type Danfoss AMV 150 with Danfoss
valve housing type AHQM placed on the primary return flow pipe.
The AMV actuator is electrically wired to the controller from the
plant.
The electrical actuator has undergone a functional test and is preset
from factory.
In the event of operating disturbances the actuator can be shut off
manually in accordance with enclosed instructions, by turning the
manual override knob on top of the actuator clockwise.
Please see enclosed instructions,
Electrical actuator AMV 13
Flow-controller with integrated control valve AHQM
Instructions
Installation Guide
AMV 150
AHQM, DN 40-100
AMV(E) 435 +
DN 40, 50 DN 50-100
AHQM DN 40, 50
AMV 150 + AMV 150 + AMV 150 +
VS2 (DN 15) VMV AVQM (DN 15)
ENglIsh
Actuators for three point control AMV 150 www.danfoss.com Page 2
DANsK Motorer til 3-punkts styring AMV 150 www.danfoss.dk Side 3
DEUTsCh Stellantriebe für 3-Pkt.- Eingangssignal AMV 150 www.danfoss.de Seite 3
sVENsKA
Motor för 3-punktsreglering AMV 150 varme.danfoss.se Sida 4
NEDERlANDs Servomotor met 3-puntssturing AMV 150 www.danfoss.nl Pagina 4
lIETUVIŲ K.
Pavaros trijų padėčių valdymui AMV 150 www.danfoss.lt 5 puslapis
lATVIsKI Motori trīs punktu kontrolei AMV 150 www.danfoss.com Lpp. 5
MAgYAR Szelepmozgatók hárompontos szabályozáshoz AMV 150 www.danfoss.com 6. oldal
ČEsKY
Servopohony s tříbodovým regulačním signálem AMV 150 www.danfoss.cz Strana 6
POlsKI Siłowniki sterowane sygnałem 3-punktowym AMV 150 www.danfoss.pl Strona 7
РУССКИЙ
Электроприводы для трехпозиционного регулирования AMV 150 www.danfoss.ru Страница 7
+ –
Δp
v
Q  Δp ≥ 0.5 bar
max v
Danfoss Heating
73691180 DH-SMT/SI VI.KU.N2.1J © Danfoss 01/2008 1

14.0 Pump, DHW Cylinder circuit

Domestic hot water circulation pump
VX Solo II with connection pipes for domestic hot water cylinder on
the secondary side (types HWS and H2WS) are fitted with a circula-
tion pump from factory.
It is recommended to set the pump at highest speed of rotation (set-
ting 3) before start-up. Then set the pump at lowest possible speed
of rotation (setting 1), in due consideration of the electricity con-
sumption and the heating comfort. Factory setting of the selector
switch is centre position (default). Select setting 2 and 3 only if the
pump setting does not meet actual system requirements.
Please see enclosed instructions,
GRUNDFOS UPS
Grundfos UP UPS
GRUNDFOS INSTRUCTIONS
UPD, UPSD
UP, UPS, UPD, UPSD
32 DKDHR
AMV(E) 435 + AMV(E) 438 SD + AMV(E) 438 SD +
AHQM DN 50-100 AHQM DN 40, 50 AHQM DN 50-100
Δp : 0.5-4.0 bar
v
P = 1.5 × PN
test
VI.LR.K1.00 DH-SMT/SI 1
VX Solo II substations
AHQM
Selector switch
VI.GP.P2.02
Manual override (AMV 150)
Press and hold the button (on
the bottom side of the actuator)
during manual override.
Danfoss District Energy