Danfoss VX Solo II Series Instructions For Installation And Use Manual page 28

Instructions for installation and use
VS2 / AMV 13
VX Solo II substations can be supplied with a 2-way valve VS 2 and
an electrical actuator AMV 13, which in combination with the ECL
controller controls the heating circuit.
The electrical actuator has undergone a functional test from factory
Please see enclosed instructions,
Electrical actuator AMV 13
2-way valve VS 2
INSTRUCTIONS
VS2 2-way
DN L (mm)
15 65
20 70
25 75
DN L 1 (mm)
15 131
20 142
25 159
DN L (mm)
3
15 69
20 74
DN L 2 (mm)
25 79
15 139
20 154
25 159
7369267-9 SIBC R&D EI.97.Q2.00 © Danfoss 12/01 1
Safety function(option)
For VX Solo II substations with electronic control Danfoss ECL
210 or ECL 310, the heating circuit(s) can be supplied with safety
function (safety thermostat type Jumo AT + actuator AMV 13) for
protection against overheating.
From factory the Jumo AT safety thermostat is pre-wired to the
Danfoss ECL controller with a 2 m cable, enabling the thermostat
housing to be mounted in any mounting position on the house-
hold piping (HE supply) on site.
Please see enclosed operating instructions
Jumo heatTHERM-AT
28 DKDHR
VX Solo II substations
VS2
VI.GP.P2.02
AMV 13
Danfoss District Energy