qAppliance door
W ith good care and cleaning, your appliance will retain
A p p l i a n c e d o o r
its appearance and remain fully functional for a long
time to come. This will tell you how to remove the
appliance door and clean it.
Removing and fitting the appliance door
To clean the door panels, you can detach the appliance
door.
:
Warning – Risk of injury!
The hinges of the appliance door may snap shut with
great force. Always fully turn the two locks for fitting and
removing the appliance door.
:
Warning – Risk of injury!
If the appliance door has been removed without turning
both locking levers to their limit stops, the hinge may
snap shut. Do not reach into the hinge. Call the after
sales service.
Detaching the appliance door
Open the left- and right-hand door locks (fig.
1.
To do this, hold the screwdriver horizontally and use
it to push the door lock (black component) on each
side of the door all the way up (fig.
Tip: Use a torch to light up the gap so that you can
see the door locks.
Door lock closed (fig.
Door lock open (fig.
"
).
#
)
$
)
Open the appliance door approx. 45° (fig.
2.
Using a coin, turn both the left- and right-hand locks
3.
on the inside of the appliance at the bottom as far as
they will go.
Left-hand lock: Clockwise
Right-hand lock: Anti-clockwise
The arrows will now be pointing to one another and
the lock will click into place (fig.
!
).
Left-hand lock secured (fig.
Right-hand lock released (fig.
en
Appliance door
%
).
&
).
'
)
(
)
25
Need help?
Do you have a question about the B4ACM5H.0B and is the answer not in the manual?