Basic Settings; List Of Basic Settings; Changing The Basic Settings - NEFF B4ACM5H.0B Instruction Manual

en

Basic settings

QBasic settings
T here are various settings available to you in order to
B a s i c s e t t i n g s
help use your appliance effectively and simply. You can
change these settings as required.

List of basic settings

Depending on the features of your appliance, not all
basic settings will be available.
Basic setting
™‹‹ Automatic childproof lock
™‹‚ Audible signal duration upon
completion of a cooking time
or timer duration
™‹ƒ Amount of time until a setting
is applied
™‹„ Button tone that sounds when
a button is touched
™‹... Brightness of the display illu-
mination
™‹† Display time of day
™‹‡ Enable childproof lock activa-
tion?
™‹ˆ Interior lighting on when
appliance in operation?
™‹‰ Cooling fan run-on time
™‹Š Telescopic rails retrofitted?** ‹ = no* (for rails and single
™‚‹ Sabbath mode available?
™‚‚ Water hardness**
™‚ƒ Reset all values to factory set-
tings?
* Factory setting (factory settings may vary depending on the appli-
ance model)
** Not available for all appliance types.
--------
16
Options
‹ = no*
‚ = yes
‚ = approx. 10 seconds
ƒ = approx. 30 seconds*
„ = approx. 2 minutes
‚ = approx. 3 seconds*
ƒ = approx. 6 seconds
„ = approx. 10 seconds
‹ = off
‚ = on*
‚ = dark
ƒ = medium*
„ = bright
‹ = hide the time
‚ = display the time*
‹ = no
‚ = yes*
ƒ = yes, with locked door**
‹ = no
‚ = yes*
‚ = short
ƒ = medium*
„ = long
... = extra long
pull-out system)
‚ = yes (for double and triple
pull-out systems)
‹ = no*
‚ = yes
‹ = softened
‚ = soft (up to 1.3 mmol/l)
ƒ = medium (1.3 - 2.5 mmol/
l)
„ = hard (2.5 - 3.8 mmol/l)
... = very hard* (above
3.8 mmol/l)
‹ = no*
‚ = yes

Changing the basic settings

The function selector must be set to the "Off" position.
Press and hold the ! button for approx.
1.
four seconds.
The first basic setting appears in the display,
e.g. ™‹‹ ‹.
Use the temperature selector to change the setting
2.
as required.
Use the ) or ( button to continue going through all
3.
the basic settings, and use the temperature selector
if you want to change any of these settings.
When you have finished, press and hold the ! button
4.
again for approx. four seconds to confirm the
settings.
This applies all of the basic settings.
You can change the basic settings again at any time.