○
Passing Light Button
A
When pushing the passing light button
the vehicle ahead that you are about to pass. The passing light is shut off as soon as the button is
released.
○
Dimmer Switch
B
High and low beam can be selected with this switch. When the headlight is on high beam
beam indicator light goes on (page 10).
High beam
Low beam
○
Menu Switch
C
The menu buttons are used to control the TFT display on the combination instrument. Please refer to page
11.
○
Turn Signal Switch
D
When the turn signal switch is turned to the left
off. To stop blinking, push the switch in.
○
Horn Button
E
When the horn button is pushed when the ignition switch is turned on; the horn sounds.
Front/Rear Brake Lever
This scooter is equipped with four-position adjustable front/rear brake levers for fitting different hand sizes.
To adjust the brake levers, do the below steps:
Push the brake lever forward ○
Turn the adjuster ○
lever forward.
Release the brake lever and check that the lever operates correctly.
○
a
.
a
until the number (position) aligns with the indicative mark ○
A
, the high beam indicator light goes on to signal the driver of
or right
, the corresponding turn signals blink on and
○
A
○
B
23
, the high
while pushing the
B