Familiar With This Product; Description Of Buttons; Programmable Buttons - Retevis RT53 User Manual

Familiar with this Product

1. Description of Buttons

[PTT] Transmit button Switch between transmission and reception; when
transmitting, press this button and speak to the
microphone; release the button to receive.
Side button SK1 Short press to Quickly access to battery power.
Long press to transmit power switching,Switching
between high power and low power.

2.Programmable Buttons

No. Shortcut name Purpose
1 None No function is assigned to the preset button.
2
Transmit power Quickly switch between high power and low
power.
3
Emergency mode on Quickly establish an emergency call. This is
the recommended option for the orange
button.
Quickly end an emergency call initiated
Emergency mode off
4
outward.
Quickly switch between repeater mode and
offline
5
offline mode.
Quickly turn on/off encryption for channel
6 Encryption on/off
(only for digital mode).
7
Quickly turn on or off the VOX function.
VOX
8
Quickly call key, After pressing the button to
One-touch calling
call, send the corresponding call, message or
other application functions.
Contacts
9 Press this key to enter the digital contact list
DIGITAL TWO WAY RADIO
05
DIGITAL TWO WAY RADIO
No. Shortcut name Purpose
10 Contacts and initiate a call or call related functions
11 Zone increases Press this key to switch to the previous zone
12 Zone decrease Press this key to switch to the next zone
13 Zone switching Quickly select the zone, allowing the user to
switch between two zone.
14
Individual Operation Press this key to turn on and off Individual
Operation
Monitor
15
Battery power indication Quickly turn on or off the monitor function.
16
Scan on / off Quickly access to battery power. The user
17
can check the battery status by voice prompt.
Time to broadcast Quickly turn the scan function on or off.
18
Press this button to broadcast the current
time.
19
1750Hz Signal
Fast Transmit 1750 pilot signal
When scanning stops, press this key to
Noise channel temporarily
20
temporarily delete the noise channel that is
deleted
not needed temporarily. The channel will not
be detected in the next scanning detection.
When the walkie-talkie restarts scanning, the
channel will be restored to the scanning list.
Note:
● The same button short press and long press can achieve different
functions.
06