Saeco 740814352 Operating Instructions Manual page 31

This function allows you to change the display language.
You can choose among Italian, German, Portuguese,
Spanish, English, French, Dutch, Polish and Swedish. The
appliance is usually programmed on the language of the
country in which it is sold.
The hardness of tap water may vary depending on the
region. For this reason, the appliance can be set according
to the water hardness in the place where it is to be used,
expressed on a scale of 1 to 4.
The appliance is factory set on a hardness value of 3. The
setting should be adjusted according to the level of water
hardness in the local area.
This function allows you to turn on the cup heater present
in the machine cover.
PROGRAMMING MACHINE FUNCTIONS
LANGUAGE *
WATER HARDNESS
When the function ap- Select the desired lan-
pears, select it using the guage.
"OK" button.
Dip the strip in water for 1 When the function ap-pears,
second. select it using the "OK"
Check how many squares button.
change colour.
CUP HEATER *
TEMPERATURE
When the function ap- Choose whether you wish
pears, select it using the to turn the cup heater plate
"OK" button. on or off.
LANGUAGE LINGUA
ENGLISH ITALIANO
Press the "OK" button to
confi rm your choice.
WATER HARDNESS * WATER HARDNESS
CUP HEATER
HARDN 2
Select the corresponding hardness
(e.g. 2 squares = Hardness 2) and
memorize the value by pressing
the "OK" button.
CUP HEATER CUP HEATER
ON OFF
Press the "OK" button to
confi rm your choice.
31