KYMCO PEOPLE S 125 Owner's Manual page 16

Service Indicator Reset:
After you change the engine oil ,you need to
reset the Service Indicator.
1.Push MODE button, the multifunction display
will change (ODO→Trip→Oil service)
repeatedly in sequence.
2.Choose Oil service mode，press MODE
button and ADJ button at the same time for 2
seconds and the display will turns to 0.0,the
service indicator is reset.
3.The service indicator will turn on again when
you reach next 2000KM(oil service) .
▆NOTE:When the Service indicator is on,the
ODO/Trip and mileage number will flash.
1 2
CONTROLS & FEATURES